Symbols - Hart HTBG01 Manual Del Operador

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME
Safety Alert
Read
Operator's
Manual
Eye Protection
Wet
Conditions
Alert
No Hands
Symbol
Hot Surface
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating
Current
n o No Load Speed
.../min Per Minute
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result in death
or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death
or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in minor
or moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an injury
hazard, such as a situation that may result in property damage.
DESIGNATION/EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's manual before
using this product.
Always wear eye protection with side shields marked to comply with ANSI Z87.1.
Do not expose to rain or use in damp locations.
Failure to keep your hands away from the wheel will result in serious personal injury.
To reduce the risk of injury or damage, avoid contact with any hot surface.
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
5 – English