General information
Where to mount the Feedback System:
- AWAY from possible WATER INFILTRATION.
- AWAY from EXCESSIVE HEAT SOURCES (i.e. exhaust manifolds).
- AWAY from IGNITION WIRE.
Perform good electrical connections and avoid the use of wire splicers.
The best electrical connection is properly isolated soldering.
Inform the customer that if the GAS system fuse blows, the Feedback System restores the
System on PETROL mode.
In order to avoid irreparable damage, do not for any reason open the box of the Feedback System,
especially when the engine is rotating or the ignition key is on.
A.E.B. is not responsible for damages to persons or things resulting from the tampering of
its products by unqualified personnel, where such tampering occurs, THE WARRANTY IS
VOID.
INCORRECT
INSTALLATION
Is170TC-0 Rev. 211004-0
Mounting the Feedback System
INSTALLATION
INCORRECT
English
CORRECT
INSTALLATION
13 - 56