Using The Device - Marta MT-1349 Manual De Instrucciones

 To disconnect the hose, press the connector button and pull the handle
 Insert the tube into one another (for model MT-1349)
* for model MT-1350 metal telescopic tube is used
 Connect one of the nozzles:
 Combined Floor / carpet brush
 Sofa brush
 Crevice nozzle
 Pull the cord and connect it to the network. Device is equipped with cord rewind system. For cord rewind push button, always hold the cord and plug to avoid any injuries.

Use airflow adjusting button to control the suction power

USING THE DEVICE

 Before using the device, pull the cord to the required length and insert the plug into network. Yellow mark on the cord matches its optimal length, red mark matches the limit length.
 To turn vacuum cleaner on push On/Off button; to turn of push On/Off button once again.
 NOTE: in rare instances while vacuum cleaner is working hissing noise can appear. It will disappear over some time and is not an indication of malfunction.
 Never use vacuum cleaner for cleaning of cement, glue and plaster. These substances can clog and damage the filter.
 Airflow adjusting button is on the handle of the vacuum cleaner.
12
MT-1349/MT-1350