Layout And Items Supplied - EINHELL DSE 125 Manual De Instrucciones Original

control.
g) Make sure to use tools, accessories,
spare parts, etc. in accordance with these
instructions. Take the conditions in your
work area and the job to perform into
account. Using tools for any purpose other
than the one for which they are intended can
lead to dangerous situations.
4. Service
a) Have your tool repaired only by trained
personnel and/or the authorized service
agent, using only genuine spare parts.
This will ensure that your tool remains safe to
use.
Special safety information
•
This tool may be used only for dry grinding/
sanding operations.
•
Use on materials containing asbestos is pro-
hibited.
•
Always disconnect the compressed-air sup-
ply before carrying out any work on the equip-
ment (cleaning the equipment, changing the
abrasive paper, etc.).
•
To protect your health, always wear safety
goggles and a dust mask during sanding/
grinding work!
•
Keep your workplace clean and well lit.
•
Make sure that the workpiece is sufficiently
secured so that it cannot slip.
•
Keep children away.
•
For your own sake, keep the equipment clean
at all times and check it for signs of damage
each time after using it.
•
Make sure that the switch is set to OFF before
you connect up the tool.
•
Take care to maintain a steady foothold. Ne-
ver use the tool on ladders and scaffolds.
•
Touching or inhaling dust from sanding/
grinding jobs can be harmful for the user and
other persons nearby.
•
Use only the sanding/grinding disks and ab-
rasive paper specified by the manufacturer.
•
It is prohibited to use cutting disks, sanding/
grinding wheels or similar.
•
The permissible speed of the sanding/grin-
ding disk and abrasive paper used must be
higher than the maximum speed of the air
tool.
•
Fasten the self-adhesive abrasive paper con-
centrically on the sanding/grinding disk.
•
Dispose of any sanding/grinding waste pro-
perly. If necessary, ask your local environmen-
tal protection office for details.
Anl_SA_DSE_125_SPK8.indb 14 Anl_SA_DSE_125_SPK8.indb 14
GB
•
Important. Wear safety goggles and a
dust mask.
Keep this safety information in a safe place.

2. Layout and items supplied

2.1 Layout (Fig. 1/2)
1. Dust extractor adapter
2. Operating switch
3. Control lever
4. Handle
5. Nipple for the air connection
6. Eccentric sanding/grinding plate
7. Open-ended wrench
8. Abrasive paper, grit size 80
9. Abrasive paper, grit size 100
10. Abrasive paper, grit size 120
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
- 14 -
22.11.2016 07:41:07 22.11.2016 07:41:07