Air Supply And Connections - DeWalt DWMT74271 Manual De Instrucciones

AIR SUPPly AND CONNeCTIONS

• Do not use oxygen, combustible gases, or bottled gases
as a power source for this tool as the tool may explode,
possibly causing injury.
• Do not use supply sources which can potentially exceed
200 PSI (13.8 bar) as tool may burst, possibly causing injury.
• The connector on the tool must not hold pressure when the air
supply is disconnected. If the wrong fitting is used, the tool can
remain charged with air after disconnecting and thus will be able
to operate with the air line disconnected possibly causing injury.
• Always disconnect air supply:
1) Before making adjustments;
2) When servicing the tool;
3) When tool is not in use;
4) When moving to a different work area, as accidental
actuation may occur, possibly causing injury.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
9