Scope Of Delivery - MESTO RESISTENT PLUS Instrucciones De Uso

GB IRL
Repairs and modifications to the tank are not permitted.
The effect of the safety valve must not be bypassed or made inoperative.
Contact between sprayer materials and hydrogen peroxide or other agents that give
off oxygen may result in increased pressure similar in nature to an explosion. Never
place such agents in the device.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature. (→Table 1 below).
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessories.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the pressure gauge to ensure the maximum
spraying
(→ Table 1 below).
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (→ Section "After Use", Section 1).
Collect and dispose of the spraying agents according to all applicable laws,
requirements and regulations.

Scope of delivery

Tank [4] with pump [1], instructions for use [2], spare parts pouch [3], spray wand [5], shut-
off valve [6], spray line [7] (Fig. 1)
You will find the illustrations referred to in the text in the front fold-out
pages 3 – 5 of these instructions for use.
Technical data
Device family
Type
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Material of tank
Technical residual quantity
Max. volume flow
Recoil force
Table 3
AUS USA
pressure
13
NZ CDN
is not
RESISTENT
3594
4 l
5 l
6 bar
50 ° C
2.8 kg
Stainless steel
0.03 l
4.5 l/min
< 5 N
IND
exceeded