Technical Data; Installation - Zanussi ZFC649WAP Manual De Instrucciones

Problem
Customer Service
If your appliance is still not working properly after making
the above checks, contact the nearest service centre.
To obtain fast service, it is essential that when you apply
for it you specify the model and serial number of your ap-
pliance which can be found either on the guarantee certifi-
cate or on the rating plate located on the external right
side of the appliance.
Replacing the lamp
1. Disconnect the mains plug from the mains socket.

Technical data

Volume (gross) Litre
Volume (net) Litre
Rated Power Watt
Voltage Volts
Further technical information are situated in the rating plate on the external right side of the appliance.

Installation

Positioning
Warning! If you are discarding an old appliance that
has a lock or catch on the lid, you must ensure that
it is made unusable to prevent young children being
trapped inside.
Important! The appliance shall have the plug accessible
after installation.
This appliance can be installed in a dry, well ventilated in-
door (garage or cellar), but for optimum performance in-
stall this appliance at a location where the ambient tem-
Possible cause
There is no voltage in the mains sock-
et (try to connect another appliance in-
to it).
500 Height mm
495 Width mm
130 Depth mm
230 Weight Kg
Call an electrician.
2. Replace the lamp with one of the same power and
specifically designed for household appliances. (the
maximum power is shown on the lamp cover)
3. Connect the mains plug to the mains socket.
4. Open the lid. Make sure that the lamp comes on.
876 Rising Time
1611 Energy Consumption
665 Freezing Capacity
59,5 Climatic Class
perature corresponds to the climate class indicated on the
rating plate of the appliance:
Climate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Solution
hours 31
kWh/24h 1,068
kg/24h 20
SN-N-
ST-T
Ambient temperature
19