Metrix HX0034B Manual De Instrucciones página 7


Values
Parameters
Nominal calibre
Input/output ratio
Resolution
Error in
measurement
Phase error at 50 Hz
Bandwidth
Derating in frequency
Rise time
Output voltage
Ip = 0 ()
Power supply current
() Ambient temperature : 40°C max.
() after zero offset

Mechanical specifications
Dimensions :
Weight : approx. 160 g

Environmental conditions
Operating temperature (clamp only) : -10°C to +55°C

Safety compliance
IEC 61326-1 EMC
IEC 61010-2-032 : Safety rules
7. Maintenance
Before any maintenance operations, the clamp must be disengaged from
the conductor and must be disconnected from the external device to
which it is linked.

Maintenance of the magnetic circuit
Keep the clamp jaws as clean as possible. If necessary, clean them
using a soft, lint-free cloth.

Cleaning of the casing
Clean the clamp with a cloth and soapy water. Rinse off with a cloth
moistened with clean water. Never allow the clamp to come into contact
with water. Dry using a dry cloth or pulsed air (max. temperature +70°C).

Calibration verification
Annual verification of the measurement characteristics by an approved
organization.
Value
80 A peak (or 57 A
20 mV/A
10 mA
% of 0 to 45 A peak (or 31.8 A
)
RMS
 1.5 %  10 mA
0 to 45 A peak (or 31.8 A
)
RMS
 1 °
500 kHz @ -1dB or 1 MHz @ -3dB
40 A
()
4 A
RMS
350 ns from 10 to 90 %
for
 ± 0.3 mV
typically 23 mA (20 to 25 mA)
138 x 49 x 28 mm
max. @ 100 kHz - 8 A
RMS
max. @ 1 MHz
i. e. ± 15 mA
DC
)
RMS
45 to 80 A peak
± 4 %
45 to 80 A peak
 1 °
max. @ 0,5 MHz
RMS
DC