Audio Settings; Other Settings - JVC KD-X176 Manual De Instrucciones

Audio Settings

Select a preset equalizer directly
Press repeatedly.
(or)
Press , then turn the volume knob within 5 seconds.
Preset equalizer:
[FLAT] (default)/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/[POP]/
[POWERFUL]/[R&B]/[TALK]/[USER]/[VOCAL BOOST]/[BASS BOOST]/[CLASSICAL]
• Drive equalizer ([DRVN 3]/[DRVN 2]/[DRVN 1]) boosts specific frequencies in the audio signal
to reduce the noise heard from outside the car or running noise of the tyres.
Store your own sound settings
1
Press and hold to enter [EASY EQ] setting.
2
Turn the volume knob to select an item, then press the knob.
Refer to [EASY EQ] for setting and the result is stored to [USER].
• To return to the previous setting item, press
• To exit, press .
10
ENGLISH

Other settings

1 Press and hold
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press
To return to the previous setting item, press
[EQ SETTING]
[PRESET EQ] Selects a preset equalizer suitable to the music genre.
[EASY EQ]
.
.
to exit.
• Select [USER] to use the settings made in [EASY EQ] or [PRO EQ].
[FLAT]/[DRVN 3]/[DRVN 2]/[DRVN 1]/[HARD ROCK]/[HIP HOP]/[JAZZ]/
[POP]/[POWERFUL]/[R&B]/[TALK]/[USER]/[VOCAL BOOST]/[BASS BOOST]/
[CLASSICAL]
• When the display demonstration is activated ([ON] is selected initially,
page 5), [POWERFUL] is automatically selected as the [PRESET EQ].
– If you set [DEMO MODE] to [OFF] (page 5), [FLAT] is selected as the
default setting for [PRESET EQ].
Adjusts your own sound settings.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [PRO EQ].
[SUB.W SP]*1*2: [00] to [+06]
[SUB.W]*1*3: [–08] to [+08]
[BASS]: [LVL–06] to [LVL+06]
[MID]: [LVL–06] to [LVL+06]
[TRE]: [LVL–06] to [LVL+06]
.
Default: [XX]
(Default: [+03]
[00]
[LVL 00]
[LVL 00]
[LVL 00])