Using the MF-MM Dethatcher
The MF-MM dethatcher MultiTool is
designed to loosen and remove old, dry
cuttings, twigs as well as moss and the
residue of roots from lawns.
Preparations
If the lawn is very dry, spray it with water
to soften the ground a little and reduce
the amount of dust created.
If the grass is longer than about 2 in
(5 cm), mow it before using the
dethatcher.
MF-MM
:
Set the handlebar to the normal
working position. See chapter on
"Adjusting the Handlebar" in the
MultiEngine instruction manual.
:
To reduce the risk of accidents or
injury, remove all obstacles and
objects from the work area.
:
Plan the route to be taken.
The MF-MM dethatcher is operated in
the forward direction only.
To reduce the risk of damage and
breakage, the dethatcher may only
rotate in one direction.
Arrows on the flanges show the correct
direction of rotation – see "Mounting the
MultiTool".
English / USA
To reduce the risk of injury from
thrown objects, never use the
dethatcher without the properly
mounted deflector with the two
extensions and the mud flap.
These devices divert loosened and
removed material away from the
machine and operator.
11