2. CONTENTS OF THE RETAIL BOX
SRC-System™ for C3 helmets*
Flexible Boom
Pin
Connector
Cover
USB Connector
SRC-System™ for C2 / Concept helmets
Microphone
2 Speakers
Flexible Boom
Pin
USB Connector
Cover
24
Microphone
2 Speakers
Pin
USB
Channel A Button
• Connect to Rider A
• Mp3 Button
Mobile Phone
Button
Channel B Button
• Connect to Rider B
• FM Radio Button
Volume Up / Forward Button
Volume Down / Rewind Button
Channel A Button
Pin
• Connect to Rider A
• MP3 Button
Mobile Phone Button
Channel B Button
• Connect to Rider B
• FM Radio Button
Volume Up / Forward
Button
Volume Down / Rewind
Button
USB
*
Connector
The product is
different sizes
Wall charger plug
USB adapter cable
Velcro® pads
MP3 cable
Microphone sponges
User Manual, stickers
The cover lid protecting the micro USB Connector should be kept tightly
closed at all times to prevent moisture from entering the device.
3. CHARGING THE HEADSET
Make sure that your headset is fully charged for at least four
hours before initial use.
Insert the USB cable to the wall charger and
insert the other end of the cable to the
headset's micro USB Connector. While charging,
the Red Light turns on. When charging is
complete, the Red Light will turn off.
Your wall charger and USB adaptor cable
serve two purposes:
1. Charging your headset from
any A/C wall socket or from a USB port on your computer
(charging time from computer takes longer)
2. Downloading software upgrades from your Windows® XP™ or
Vista™ based computer (see section 4.4 for details).
offered in
IMPORTANT: