Bringing into use / Maintenance and cleaning / Service / Warranty
j
Lower the clamping lever
blade
.
7
j
Turn the clamping lever
wise to increase the tension.
j
Turn the clamping lever
clockwise to reduce the tension.
NOTE: Sawing with too little tension in the
saw blade
can lead to inaccurate results.
7
Removing the saw blade
j
Lift up the clamping lever
j
Press the top saw blade mount
j
Lift the saw blade
j
Unhook the saw blade out of the bottom saw
blade mount
by moving it forward.
14
Maintenance and cleaning
Q
Maintenance
Q
WARNING!
DANGER OF INJURY!
Pull the mains plug out of the socket before you
carry out any task on the device,
The device requires almost no maintenance.
Cleaning
Q
j
Clean the device frequently; for best results, do
this immediately after you have finished using it.
j
Do not allow any liquids to enter the device.
Use a dry cloth to clean the device.
j
Keep the ventilation slots free of dust and dirt.
j
Do not under any circumstances use petrol or
strong solvents.
j
Store the device in a dry room.
Service
Q
J
WARNING!
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
to tension the saw
13
horizontally clock-
13
horizontally anti-
13
:
7
.
13
downward.
8
slightly.
7
Have your device
J
WARNING!
needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to use.
Warranty
Q
This appliance is guaranteed for 3 years
from the date of purchase. It has been care-
fully produced and meti-culously checked
before delivery. Please keep your receipt
as proof of purchase. Contact your service
centre by telephone in case of questions
pertaining to the warranty. Your goods can
be transmitted free of cost only in this man-
ner. This warranty applies only to the initial
purchaser and is non-transferable.
The warranty covers only material or manufactur-
ing faults, not normal wear or damage to fragile
parts such as switches or rechargeable batteries.
The appliance is intended solely for private, not
commercial, use.
If this product has been subjected to improper or in-
appropriate handling, abuse, or interventions not
carried out by one of our authorised sales and
service outlets, the warranty will be considered void.
This warranty does not affect your statutory rights.
GB
DES Ltd
Units 14-15
Bilston Industrial Estate
Oxford Street
Bilston (Great Britain)
WV14 7EG
Tel.:
0870 / 787-6177
Fax:
0870 / 787-6168
e-mail: support.uk@kompernass.com
If the plug or lead
GB
19