The On-Screen Display - Insignia NS-1DVDR Guía Del Usario

Menu Available settings
Rating–You can select the rating restrictions
Lock
for your DVD player. Ratings are 1–8 (1 is the
(Parental
most restrictive). When you select this option,
Control)
you must enter a password.
Settings
• Note: If you set a rating for your
recorder, all disc scenes with the same
rating or lower are played. Higher rated
scenes are not played unless an
alternate scene is available on the disc.
The alternative must have the same
rating or a lower one. If no suitable
alternative is found, playback stops.
You must enter the 4-digit password or
change the rating level in order to play
the disc.
Set Password–You can enter or change your
password.
• Note: If you forget your password, you
can clear the password by going to the
Setup menu, selecting Start, then
pressing ENTER. Input the six-digit
number (210449), select OK when the
message appears, then press ENTER.
The password is cleared.
Area Code–You can enter the area code whose
standards were used to rate the DVD (see
"Area code list" on page 23).
Recording Rec Mode Set–You can set the picture quality
for recording a DVD. (XP=excellent,
Settings
SP=standard, LP= low, EP=extended.)
Auto Chapter–You can set the auto chapter
markings (made during recording) to 5-minute
intervals, 10-minute intervals, or None.
Initialize–You can formats a DVD for
Disc
recording. For DVD-RWs, you can choose VR
Settings
Mode or Video Mode. For DVD+RWs, you can
choose OK.
• Caution: If you change the format of a
DVD, the disc is erased.
Finalize–You can fix the recordings in place so
the DVD can be played on a regular DVD player
or a computer with a suitable DVD-ROM drive.
• Caution: If you finalize a DVD-R or
DVD+R, you cannot edit or record
anything else on the disc.
Disc Label–You can enter a name for the DVD.
See "Naming a title" on page 19.
Disc Protect–You can protect recordings,
depending on the type of DVD you are using.
For DVD+RWs, it prevents editing, erasing,
overwriting, or regular recording. For DVD+Rs
or DVD-RWs (VR mode), it prevents editing,
erasing, and regular recording. It is not
compatible with DVD-RWs in Video mode or
DVD-Rs. To unlock a DVD, select OFF.

The on-screen display

Some DVDs require specific operation or allow
only limited operation during playback. When
this occurs, is displayed and the action is
prohibited or not available.
12
Displaying information while watching TV
While watching a DVD, press DISPLAY to
display or remove the information displayed
on-screen.
In the example a DVD-RW in VR mode is
inserted.
Disc name
and format
Displaying disc information on screen
You can display various information about the
disc loaded on screen. Some items can be
changed using the menu.
To display disc information on screen:
1 Press DISPLAY once to show current status.
Example: DVD-RW in VR mode
2 Press DISPLAY again to show playback
information.
The items displayed differ depending on the
disc type or playing status.
3 Select an item by pressing
change or select the setting by pressing
For details about each item, see "Disc
playback features" on page 9.
•
•
•
•
•
•
•
www.insignia-products.com
Record mode, free space,
and elapsed time
Current date and time
.
/
Title—Current title (or track) number/total
number of titles (or tracks)
Chapter—Current chapter number/total
number of chapters
Time—Elapsed playing time
Audio—Selected audio language (DVD
VIDEO only) or audio channel
Subtitle—Selected subtitle
Angle—Selected angle/total number of
angles
Sound—Selected sound mode
Note
If no button is pressed for 10 seconds, the
on-screen display disappears.
Input
source
/ and