Features; Back Panel; Front Panel - Insignia NS-1DVDR Guía Del Usario

Features

Front panel

Item Description
1
POWER
button
2 Disc tray
3 Display window
4 Remote sensor
5 AV IN 2
(Video/Audio)
6
OPEN/CLOSE
button
7
(Play)
button
8
(REC)
button
Function
Turns your recorder on and off.
Place a disc on the tray when it
opens.
Shows the current status of your
recorder.
lights when your recorder is in
timer recording or when a timer
recording is programmed.
REC
lights when your recorder is
recording.
PM lights to indicate PM time.
indicates total
playing time, elapsed time,
remaining time, or current deck
status.
Receives signals from the remote
control.
Connect the audio/video output of
an external source (such as an
audio system, TV, monitor, VCR, or
camcorder) to these jacks.
Press to open or close the disc tray.
Press to start playback.
Press to start recording. Press
repeatedly to set the recording time
(duration).
www.insignia-products.com

Back panel

1 2
4 5 6
Item Description
1 COMPONENT
OUTPUT
(Y Pb Pr)
2 INPUT 1 (VIDEO,
AUDIO L and
AUDIO R)
3 AC power jack
4 DIGITAL AUDIO
OUTPUT jack
5 AUDIO OUTPUT
(left/right)
6 VIDEO/AUDIO
OUT (VIDEO,
AUDIO L and
AUDIO R)
Caution
Do not touch the inner pins of the jacks on
the back panel. Electrostatic discharge may
cause permanent damage to your recorder.
Function
Connect to the component input
jacks on a TV (if available).
Connect to the video and audio
output jacks on an external source,
such as a VCR or camcorder, to
these jacks.
Plug the AC power cord into this
jack.
Connect to the digital audio coaxial
jack on an external amplifier, such
as a Dolby Digital decoder.
Connect to the audio input jacks
(left and right) of a TV, amplifier, or
other equipment.
Connect to the video and audio
input jacks (left and right) of a TV.
3
5