PizzaGroup ENTRY MAX 4 Manual De Instrucciones página 31

5 ALARM AND POSSIBLE FAULTS
Anomalies
The oven does not heat even though the
temperatures are set correctly.
The pilot lights are off.
The oven doesn't heat despite the main
switch is on (position 1) and the
temperatures are correctly set. The
function pilot lights of the heating
elements are off.
The analogical thermometer doesn't
notice the increase of the temperature
despite the heating elements are
correctly functioning
Inner light bulb does not switch on
Inner light bulb does not switch on
Inner light bulb does not switch on
The door is closed, but fume comes out
The baking chamber does not heat
suitably
The baking chamber does not heat
suitably in spite of the temperature
being set rightly
The temperature continues going up
over the set by thermostats
The door does not keep right closed
WORKING ANOMALIES
Possible Causes
Main switch in position "0"
No electric Energy in the net
Analogical thermometer defect
Burned inner light bulb
Inner light bulb switch defected
No electric supply power on the
Exhauster butterfly valve closed
The set temperature are too low
One or more heating elements
Thermostat probe or thermostat
contacts defected
The door closing spring has
- 31 -
light bulb
are defected
subsiding
Solutions
Turn the main
switch in position
"1"
Check the general
contactor, the
socket, the plug,
and the supply
cable.
Check and if
necessary replace
the thermometer
Replace inner light
bulb
Replace light bulb
switch
Check electric
connection with the
light bulb
Open more the
valve and check the
right functioning.
Set the right
temperature
Replace the
defecate heating
elements
Check and if
necessary replace
the thermostat/s
disassemble the left
side panel and
replace the spring