TME MM2000 Manual De Instrucciones página 3

Replacing The Battery
The instrument will indicate 'BAT LOW' when the battery
needs changing.
To change the battery, firstly remove the unit from the
outer case. The battery compartment is on the rear of the
instrument. Using a small screwdriver ease back the tab
of the battery compartment. The compartment will then
lift away.
Open Circuit Thermocouple Detection
An error in the probe is shown on the display by a series
of bars '- - - - -' coupled with the word 'INPUT' at the top
of the display. This indicates either that the probe has an
error or the temperature is out of range.
SPECIFICATIONS
Environmental
Ambient operating range
Storage temperature range
Humidity
4
-30°C to 50°C (-21 to 122°F)
-40°C to 60°C (-40 to 140°F)
0 to 70% R.H.
ELECTRICAL
Measurement Ranges
CENTIGRADE
-200ºC to 1372ºC
K
T -200ºC to
R -50ºC to 1767ºC
-200ºC to 1300ºC
N
J -200ºC to 1200ºC
-200ºC to 1000ºC
E
S -50ºC to 1767ºC
I/R -50ºC to
Accuracy@23ºC
Characterising error
Temperature coefficient
Cold junction compensation
Resolution
Note
Strong RF fields may adversely affect measurement
accuracy.
General
WEIGHT
DIMENSIONS
BATTERY
BATTERY LIFE
MM2000
FAHRENHEIT
-328ºF to 2501ºF
-328ºF to 752ºF
400ºC
-58ºF to 3212ºF
-328ºF to 2372ºF
-328ºF to 2192ºF
-328ºF to 1832ºF
-58ºF to 3212ºF
-58ºF to 392ºF
200ºC
±0.15% of reading ±0.2ºC
less than 0.05ºC
0.01% of reading/ºC
0.0075ºC/ºC
0.1ºautoranging to 1º 1000º
155 gms (5.47 oz)
130 x 70 x 33 mm
PP3
200 Hours
5