Dab Radio - RuarkAudio R4 mk3 Guia Del Usuario

DAB radio

Your R4 radio receives DAB / DAB+ digital radio and
displays information about the station and programme
being broadcast.
Press SOURCE and rotate the CONTROL KNOB or
repeatedly press SOURCE until DAB is displayed, then
press the knob to select it.
The first time you select DAB, or if the station list is
empty, it will automatically perform a full scan to find
what stations are available.
Change station
Press or to show the station list. Pressing it again
shows the next or previous station, to tune to a station,
select it by pressing the CONTROL KNOB.
If you do not select the station by pressing the knob
your radio will return to the current station.
Once the station list is displayed, you can scroll through
the list by rotating the CONTROL KNOB and selecting a
station by pressing the knob.
You can also show the station list by selecting MENU >
Station list.
EN-20
DAB radio text (DLS)
DLS (Dynamic Label Segment) is information broadcast
by the station. Each time you press INFO, the next set
of information is displayed, cycling through radio text,
programme type, signal strength, signal format and date.
Save preset
You can store 10 DAB stations in your preset list. See
'Common functions and system settings' section.
Recall preset
'See Common functions and system settings' section.
Station scan
If the station list is empty the radio will automatically
perform a scan as soon as you switch to DAB.
In any case, we recommend you do a scan from time to
time to update the station list because:
● New stations sometimes become available
● Stations close or may no longer be received
● Reception was poor during the original scan (for
example the aerial wasn't extended)
● You move the radio to a different region
To do a scan, select MENU > Scan.