T'nB SPCAMWIFI Modo De Empleo página 19

Shot Mode (Photo)
PHOTO
To take a Photo, make sure that the camera is in Photo mode. If the Photo icon
displayed on the LCD screen of your camera, press
To take a photo :
Press and release the pressure. The camera emits a beep, the red status indicator light
blinks for each captured shot.
Select the resolution of your photos :
Your camera can take some shots with resolution up to 5
Megapixels. You have the choice of four possible types of
resolution (Setup > Resolution).
Indicator of the chosen resolution
Take several photos at once :
In «Burst» mode, your camera takes several photos in a
single click. To take a burst of photos, make sure that the
camera is in «Burst» mode (Setup > Burst). You just have to
select the number of shot that you want for a single click: 3,
5 or 10 photos.
36
is not
multiple times until it appears.
000000
000000
Activated «Photo burst»
Playback mode
PLAYBACK
To view the videos and photos, make sure that the camera is in Playback mode.
If the Playback icon is not displayed on the LCD screen of your camera, press
ples times until it appears.
To read a sequence :
Press and release the pressure. The camera will start the playback of the selected file
During the playback of a sequence, you can accelerate
the reading, go back, pause or stop.
The opposite diagram shows you the connections of the
buttons to be activated for the choice of your actions.
(P.S : The button has the
double function «Playback» and
«Pause»)
Playback on an HDMI screen
> Connect the micro HDMI cable / HDMI to the
screen
> The camera screen turns off
> The playback control of the external display will be
on the camera
EN
multi-
37