Epson XP-431 Manual Del Usuario página 3

XP-431
Start Here
1
Unpack
2
Turn on and configure
1
2
Caution: Do not connect to your computer yet.
3
Install ink cartridges
Caution: Keep ink cartridges out of the reach of children and do not drink the ink.
1
4
Load paper
3
1
2
2
Caution: Do not lower the control
panel without first squeezing the
release bar underneath or you may
damage the product.
4 minutes
2
4
Note:
you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
1
To select your language, press
Note:
control panel. For more information, see the online User's Guide.
Press to start charging the ink delivery system. Charging takes about
4 minutes.
Note:
• The printer is designed for use with Epson
cartridges or ink.
• The cartridges included with the printer are designed for printer setup and not
for resale. After some ink is used for charging, the rest is available for printing.
Caution: Don't turn off the printer while it is charging or you'll waste ink.
2
1
Check the current paper settings on the control panel.
To use these settings, press OK. If you want to change
the settings, press or to select Change, then press
OK. Select paper size, press OK, select paper type,
press OK, then press OK again to confirm settings.
Read these instructions before using your product.
Do not open ink cartridge packages until
or , then press OK.
You can change the language later using the product's
cartridges only, not third-party
®
Letter or A4
4 × 6-inch
(102 × 152 mm)
English