Turning On The Clearreader; Standby Mode; Turning Off The Clearreader - Optelec ClearReader+ Manual Del Usuario

Optelec

Turning on the ClearReader

To turn on the ClearReader
side. The start-up process will take approximately 40 seconds. You will hear a
series of beeps to indicate that the ClearReader
start-up sound. Now the Power indicator is lit up and the ClearReader
to use.

Standby mode

+
The ClearReader will go into standby mode by pressing, and holding down the Back button and
Forward button for 2 seconds. The standby sound will be played, the Power indicator will start
blinking and the ClearReader
standby, press the Power button. When the batteries are fully charged, the standby time of the
+
ClearReader is approximately 40 hours. After 40 hours the ClearReader
switching-on the ClearReader
approximately 10 seconds.

Turning off the ClearReader

Press the Power button to power down the ClearReader
be played and the Power indicator will turn off.
English
+
+
, press the round Power button on the right-hand
+
will go into standby mode. To wake up the ClearReader
+
from the standby mode, the start-up process will take
+
+
is starting up followed by the
+
completely. The power down sound will
ClearReader
+
is ready
+
from
+
will power down. If
+
28