Performing Initial Setup - Honeywell THM5421R1021 Guia De Instalacion

3
Power optional RedLINK accessories
3.1 Install batteries in RedLINK accessories.
• Portable Comfort Control
• Wireless Outdoor Sensor*
• Wireless Indoor Sensor*
• Wireless Entry/Exit Remote*
• Wireless Vent and Filter Boost Remote*
* Requires setup. See Installer
Setup options in Step 4.5.
3.2 Connect gateway to internet and
connect to power.
3.2a Connect RedLINK Internet
Gateway to router or modem with
Ethernet cable (RJ45).
3.2b Connect gateway's power cord
to an electrical outlet that is not
controlled by a wall switch.
4

Performing initial setup

Initial setup options define the type of system you are installing:
• Residential or commercial
• Non-zoned or zoned
4.1 Follow prompts on the screen to select appropriate options.
4.2 Link the thermostat to the
equipment interface module.
Press and quickly release
4.2a
CONNECT button on the EIM.
Make sure the "Connected" light is
flashing green.
Next
the
3
3.2a
APPLICATION
residential
C O N N E C
T E D
C O N N E C
T
3.2b