Locking/Unlocking The Keyboard - Galletti EVO Manual De Instalacion Y Uso

EVO
TURNING THE TIME SLOTS ON/OFF
To turn the time slots on/off quickly, it is necessary to go to
the main screen (with the unit either on or off).
Press the SET and DOWN ARROW keys at the same time.
The clock symbol on the main screen means that the time
slots are on.
VIEWING WATER TEMPERATURE
To view the water temperature value you must have previously
configured the presence of the probe in the CONFIGURATION
MENU. To view the temperature value read by the probe you
must go to the main screen and press the UP ARROW and
DOWN ARROW keys at the same time. With a 4-pipe unit
with 2 temperature probes, it is possible to scroll through the
two screens that display the two temperature values using
the UP/DOWN ARROW keys (cold water temperature and hot
water temperature).

LOCKING/UNLOCKING THE KEYBOARD

To lock/unlock normal operation of the keys on the user unit,
press the UP + SET + DOWN keys at the same time. The
key symbol will appear on the display when the keyboard is
locked. When stand-by mode starts up it is possible to view
the main screen by pressing the ON/OFF key.
VIEWING DATE AND TIME
(INTERNAL CLOCK)
To view clock data you must view the main screen, with the
unit on. Press PRG and MODE at the same time: time and
date will be displayed for 5 seconds, and then the screen will
automatically go back to the main page.
The above procedure will not have any effect if "Clock" has
been set as well as Stand-by mode (inside the CONFIGURATION
MENU); in this case, in fact, time and date will constantly be
displayed on the screen after the stand-by time has lapsed, i.e. 30
seconds since the last operation has been carried on the display.
CHANGING DATE AND TIME
From the main screen press PRG to enter the MENU and from
here scroll through the screens until you get to Clock Setup
and press SET to enter. Change the data as required and press
SET every time to confirm and move on to the next piece of
data. Lastly, press ON/OFF to go back to the main screen.
FC66003554
Rev 00
Controller for units
USER MANUAL
IT IS strictly forbidden to reproduce this manual, even partially
CONFIGURING TIME SLOTS
From the main screen, press PRG to enter the MENU and
from here scroll through the screens until you get to Time
Slots and press SET to enter.
The first six screens are used to set the values for
the temperature SETS that can be used in time slot
configurations, i.e. T1, T2 and T3 values in SUMMER and
WINTER mode.
At any time it is possible to press the MODE key to access
the actual time slot settings.
The time slot system is hourly, daily and weekly: every hour
of every day of the week (from MONDAY to SUNDAY) is a
slot that the user can decide whether:
the fan coil is OFF
the fan coil operates with setpoint T1
the fan coil operates with setpoint T2
the fan coil operates with setpoint T3
1
2
5
1
DAY (PRG to edit)
2
TIME SLOT (UP/DOWN to scroll)
3
Day to copy to (UP+MODE)
4
SET POINT
5
View profile
3
4
EN
6