Descargar Imprimir esta página

Description; Features - Leviton 57000 Serie Instrucciones De Instalación

Ocultar thumbs Ver también para 57000 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

The 57000 TVSS Panel Protection System is a high-performance Transient
Voltage Surge Suppressor designed for use on main distribution and branch
circuit panels.
• Replaceable plug-in modules, which facilitate maintenance.
• Hybrid component suppression design.
• TVSS protection on all phases.
• Common Mode TVSS protection for WYE Systems.
• Redundant Phase Protection design, providing full phase protection in the
event of failure or removal of any one module.
• Diagnostic monitoring of each phase module.
• Acoustic as well as visual failure indicators.
• Provisions for operation with an optional Remote Supervisor Panel,
allowing monitoring of TVSS status from distant locations.
• UL Listed (except 57347-M3S) and CSA Certified design.
• Cat. No. 57000-M3S series WYE configured units provide L-G protection in
addition to the L-N and N-G modes.
• Cat. No. 57000-M3S series provides an integrated disconnect switch.
• 48-62 Hz operation.
• Location per IEC std: Class III.
• One port.
• Optional surge counter with front panel LCD display.
WARNING:
TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH
APPROPRIATE ELECTRICAL CODES AND REGULATIONS (INCLUDING
NEC/CEC, AS APPLICABLE).
WARNING:
IF YOU ARE NOT SURE ABOUT ANY PART OF THESE
INSTRUCTIONS, CONSULT A QUALIFIED ELECTRICIAN.
Page 1

DESCRIPTION

FEATURES

TO INSTALL

Publicidad

loading