Slendertone ReVive S5 Manual De Instrucciones página 9

S T E P BY S T E P G UIDE
ST E P BY S T EP G U IDE
INSERTING THE BATTERY
The battery compartment is located on the back
of your unit. To open the battery compartment,
slide the cover off with your thumb in the direction
of the arrow ( of the arrow ( ). Insert the new battery into the ). Insert the new battery into the
compartment as shown by the direction indicator
printed on the bottom of the compartment (Fig. a).
The battery symbol ( The battery symbol ( ) will appear on the display at all times during ) will appear on the display at all times during
operation. As the battery power decreases, the 3 bars on the battery
symbol disappear one by one. The outline of the battery symbol will
flash to indicate when the battery needs to be replaced. Remove the old
battery by placing your thumb against the bottom of the battery and
lifting it out. You should only use high-quality, 9V alkaline batteries to
operate your
SLENDERTONE REVIVE S
www.slendertone.com
English
Fig. a
5 unit.
RUNNING A SESSION
1. Insert the leads into the sockets on the base of the
unit (Fig. b). The leads are designed to be held
firmly in place once inserted. Attach the pins from
one lead to a single butterfly GelPad (Fig. c).
2. Remove the liner from the adhesive side of each
pair of GelPads (Fig. d) and position the GelPads
correctly (see pages 11-13). Keep the liners safe, as
you will need them at the end of the session.
3. If necessary, secure the limb(s) to be exercised
before using your
SLENDERTONE REVIVE S
4. Switch on your
SLENDERTONE REVIVE S
the On/ Off button for two seconds (Fig. f ).
5. Press the Program button to select your chosen
training regime. You cannot change a program
during a session.
6. Increase the intensity to get the strongest possible,
yet still comfortable muscle contraction. Reduce the
intensity if it becomes uncomfortable. Press the lock
button to prevent accidental changes to the intensity.
PAUSING A SESSION
If you wish to pause a session at any point, briefly
press the On/ Off button and the stimulation will stop.
Press the same button briefly a second time to unpause
the program.
Fig. b
Fig. c
5 (Fig. e ).
Fig. d
5 unit by pressing
Fig. e
Fig. f
9