Risk of damaging pedal.
Interrupt the power supply
before cleaning the Product.
Possibility of damaging the
MU_023
Rev.2
Product.
28/10/2019
OPERATION AND
MAINTENANCE MANUAL
5.3.1 Brakes for mobile version
The mobile version has 4 wheels with pedal brake. This are used to
block the Product in the required position.
Press the brake pedal with your foot, without applying too much
pressure.
Do not kick the brake pedal and do not press continuously once the
stop position has been reached.
To disengage the brake, lift the pedal with your foot.
5.4 Checks to be made every time before
use
To make sure the Product is safe and provides a correct diagnosis,
every time before use, the operator must check:
The lamp has been correctly disinfected;
-
The emitted light is stable and of adequate intensity;
-
The swinging arm maintains correctly its position;
-
The cupola maintains correctly its position.
-
6 Cleaning and disinfecting
The responsible organization must comply with the rules (standards
and directives) concerning hygiene, disinfection and sterilization
laid down by the relevant national commission.
6.1 Application method
Before proceeding to clean / disinfect the Product, make sure it is
off and cannot be switched back on.
Allow the lamp to cool down and only clean it when it is cold.
Protect the Product from water spray and detergents and do not
clean it in direct contact with liquids.
EN
Page 15 of 32