Preset; Color/ Bw - Samsung SCC-C4201 Guia Del Usuario

If you select ON and press the ENTER button, the MOTION
DET screen will come up. You can set the AREA to which the
Motion Detection function will be applied to either PRESET or
USER. If you set the AREA option to PRESET, the Motion
Detection function will be applied to the areas preset as factory
defaults. If you set the AREA option to USER and press the
ENTER button, you can change the area size and position and
select the area where you want to apply the Motion Detection
function. You can specify the size of the area by using the UP,
DOWN, LEFT, and RIGHT buttons. If the area is not flashing,
press the ENTER button. When the area starts flashing, use the
UP, DOWN, LEFT and RIGHT buttons to specify the location of
the area. Use the ENTER button and the UP, DOWN, LEFT,
and RIGHT buttons to specify the size of the area and to
position the area. Press the ENTER button again to exit the
AREA setting menu. You can use the SENSITIVITY option to
set the motion detection sensitivity. The higher the setting, the
more sensitive the motion detection.
SIZE
Use the UP,
© ©
LEFT, and
POSITION

PRESET

(SET UP)
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW
SPECIAL ...
AUTO FOCUS ONEAF
MOTION DET OFF
PRESET ...
COLOR/BW COLOR
EXIT QUIT
You can store up to 128 ZOOM and FOCUS positions with the
PRESET. You can use the PRESET function when you connect
the SSC-1000 to the RS-485.
25
SIZE
DOWN,
RIGHT
buttons.
POSITION
(PRESET MAP)
0 H 1 2 3
5 6 7 8
10 11 12 13
15 16 17 18
20 21 22 23
Press the
25 26 27 28
ENTER
30 31
HOME RETURN
button.
EXIT QUIT
(PRESET MAP)
0 H 1
5 6
10 11
15 16
20 21
25 26
30 31
HOME RETURN
EXIT
If you select a preset number and press the ENTER button, a screen
that looks as above will appear.
POSITION SET : Select to store the ZOOM and FOCUS
positions.
PRESET ID : Select to set an ID for the PRESET position,
as you did with Camera ID.
The HOME RETURN function is available with a camera
with the ROM version 1.2 or above. For instruction on the
use of this function, please refer to page 33.
COLOR / BW
The COLOR / BW option is available only with the SCC-C4203(P)
and C4303(P).
In the COLOR / BW option, you can set the IR (infrared) Filter to ON or
OFF. In the BW mode, the IR Filter is turned OFF and the level of
sensitivity is increased to a level comparable to a black and white
camera. In the COLOR mode, on the other hand, the IR Filter is turned
4
ON and the screen turns normal, as the level of sensitivity is decreased.
9
14
19
COLOR : The IR Filter is ON and the screen is normal.
24
29
BW : The IR Filter is OFF and the screen is black and
RET
white. (Sensitivity to low light is increased to a level
OFF
comparable to a black and white camera.)
AUTO : Select to automatically switch between the COLOR
mode and BW mode depending on the amount of light.
2 3 4
7 8 9
12 13 14
17 18 19
22 23 24
Press the
27 28 29
ENTER
RET
OFF button.
QUIT
PRESET NO. 0
POSITION SET ...
PRESET ID ON...
EXIT QUIT
E
26