Vacuum Cleaner Description; Vacuum Cleaner Parts And Labels; Optional Kits; Accessories - Nilfisk VHS120N1 Manual De Instrucciones

Vacuum cleaner description

Vacuum Cleaner Parts and Labels

Figure 1
1.
Identification plate which includes:
Model Code, Technical Specifications (see table on page
6), Serial N°., Year of manufacture, Input voltage.
2. Dust container.
Longopac bag for collecting vacuumed material.
®
3.
Dust container release lever.
4. Inlet
5. Inlet plug.
6. Air outlet.
7.
Caster locking lever.
8. Handle.
9. Closing band lever.
10. Safety bolt.
11. Float system.
12. Container for liquids.
13. Inlet of the container for liquids.
14. Inlet plug when using container for liquids.
15. Warning plate.
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is turned
OFF (see also par. "Primary filter shaker").
16. Plug for connecting the vacuum cleaner to an electrical
socket.
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (4, Fig. 1) and blown out through the outlet
(6, Fig. 1).
Before turning on the vacuum cleaner, fit the vacuum hose
into the inlet and then fit the required tool on to the end part
(refer to the manufacturer's accessory catalogue or Service
Center).
The diameters of the authorized hoses are indicated in the
Technical data table.
The vacuum cleaner is equipped with a main filter which
enables it to be used for the majority of applications.
Besides the primary filter, which retains the most common
types of dust, the vacuum cleaner can be fitted with a
secondary filter (absolute class H) with a higher filtering
capacity for fine dusts and dusts that are hazardous to health.
11/2017

Optional Kits

Please contact the manufacturer's sales network for
information on optional kits.
Instructions for installing the optional kits are included in the
conversion kit.
WARNING!
Use only genuine optional kits supplied and
authorized by the manufacturer.
Optional kits must be installed by qualified Nilfisk
personnel.

Accessories

Various accessories are available; refer to the manufacturer's
accessory catalogue.
WARNING!
Use only genuine accessories supplied and
authorized by the manufacturer.

Packing and unpacking

Dispose of the packing materials in compliance with the laws
in force.
MODEL
VHS120 N1/N6
(*) Weight with packing

Unpacking, moving, use and storage

Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight.
5
VHS 120 N1, N6
Figure 2
A B C
lb (*)
in in in
27.5 31.4 59.0 116.8
US
C449