Dometic TEC29 Instrucciones De Uso página 43

TEC29, TEC29LPG
Display message
Description
RESTART GEN?
Message appears after the
generator has stopped due to
overheating.
GEN CAL
Message appears when the
generator is started up; it
shows the calibration phase
which takes place before
each start-up. The generator
does not supply any voltage.
GEN WAIT
Message appears while you
are waiting for the generator
to start again.
GEN ON
The generator is operating
normally.
GEN OFF
AUTO?
Message appears when the
automatic mode is switched
on.
AUTO
Automatic mode
EN
Generator behaviour
The generator is switched off. Press the start button to
The generator is running but
does not supply any voltage.
The generator is switched off. Wait until the message has
Normal mode
The generator is idle and can
be started.
Controls are waiting for user
input
The automatic mode is
switched on
Operating the generator
Measures
restart the generator.
Wait a moment.
disappeared then attempt
ignition again.
–
–
Press the start button within
20 seconds and hold down
for 3 seconds.
–
43