Getting Started - Tait T2040II Guia Del Usuario

Introduction
Switching on
Checking
System
Availability
Transmit Timer

Getting Started

II
Your T2040 is controlled by a microprocessor which
allows it to be configured to suit the needs of your
particular fleet.
This User's guide provides a brief description of the
basic features of your radio. For information about the
advanced features, a comprehensive operators' manual
is available from your Tait dealer.
Turn the On/Off-Volume control to about one-third of its
maximum turn. You may need to finally adjust the
volume when you receive your first call.
Check to see that the SVC (service) indicator appears in
the display within a few seconds, showing that your
radio has logged on to the network.
There are three possible indications:
SVC Indicator
Continuous
Blinking
Absent
The radio is fitted with a preprogrammed timer to limit
the maximum length of transmissions. When this time
limit is reached, a three tone warning is sounded and
transmission stops. You must release the PTT key
before proceeding.
To change to the channel:
Your radio has access to a network
and is ready to make or accept calls.
Your radio does not currently have
access to a network. It is attempting
to find a site it is authorised to use, or
it may be out of range of a network
signal.
Your radio is in Conventional mode.
11
English