Receiving A Call - Tait T2040II Guia Del Usuario

Responding to
Calls
Caller
Identification
Display
Label
Preset
Number
Call
Number
System
Message
System
Message
System
Message

Receiving a Call

When you receive a call your radio will alert you with a
ringing tone like a telephone and the identity of the caller
will be displayed as explained below.
You may accept a call by lifting the microphone from its
clip, pressing the PTT key and identifying yourself (for
example "Mobile-9 Receiving").
If you do not want to accept the call, press the Clear
( ) key and the call will be cancelled.
If the call is a group call, you will hear a single ring and
then the caller will broadcast a message to all members
of your group. It is not normally necessary to reply.
The source of an incoming call or the caller's identity is
shown in the display as follows:
Example: Explanation:
VEHICLE7 The calling party is one of your preset
numbers with a label preprogrammed
into your radio.
8 The calling party is one of your network
stored preset numbers without a label
preprogrammed into your radio.
23 The calling party is in the same fleet as
your radio but is not preprogrammed.
OFLT The calling party is not in the same fleet
as your radio and is not preprogrammed.
PHONE A call from the PSTN (Public Switched
Telephone Network).
PABX A call from the PABX (Private Automatic
Branch Exchange).
13
English