Product Description; Installation And Use; First Check; Warranty - Fisso 6646 Serie Instrucciones De Uso

DANGER!
All FISSO components are designed for optimal performance when used together with the
FISSO holding system. If a component (e.g. a base) from another manufacturer is used,
the user takes full responsibility.
DANGER!
The product will be delivered non sterile and is non-sterilisable. Prior to the initial and
each following use, the product has to be cleaned and disinfected as well as checked for
visual irregularities and malfunctioning according to the indications given in this manual.
Guideline for medical devices (conformity declaration)
This product corresponds to the guideline 93/42/EEC and may solely be used for medical
applications.
Special care should be taken when these products are used together with high-frequency applications.
Contacts between the product and the high-frequency device must be avoided.

Product description

Arm support lateral
Art. # 6646.XX
Pad VE 450 mm
Articulated Arm 6600-46
Column -
with stop lid
Base component Rail clamping base
Fisso
Fastening straps optional
VE = anatomically shaped visco-elastic pad
PUR = integral foam pad made of Polyurethane
Before delivery to the clients, the components are rigidly threaded to the articulated arm and additionally
fastened with glue.

Installation and use

First check

Check the product immediately after receipt for eventual transport damages and for completeness. Complaints
can only be considered if the manufacturer, distributor or carrier is immediately notified through damage
protocol.

Warranty

The manufacturer assumes warranty for materials and manufacturing defects as well as proper functioning of
FISSO holding systems for two years from date of purchase.
Not covered by the warranty are normal wear, components with a shorter life time (e.g. arm pads), the
consequences of inappropriate handling, combinations with external products, or damage caused by the user.
Other or further claims, in particular any claims for damage are excluded. The warranty applies only if the
Baitella AG repair service is used. Please see also the General Delivery Conditions.
The warranty is limited to the express written warranty in this document.
EN
Arm support lateral Arm support vertical
Art. # 4646.XX Art. # 6656.XX
VE/PUR 450 mm VE 450 mm
4600-46 6600-56
-
∅18 x 215 mm
Rail clamping base Radial setting clamp
Fisso (partly
optional)
optional optional
18
Arm support vertical
Art. # 4670.XX
VE/PUR 450 mm
4600-70
∅16 x 215 mm
Radial setting clamp
Fisso (partly
optional)
optional
GM446-V7 / 18.12.2017