First Use - Bellarom BKM 1250 A1 Instrucciones De Uso

First use

WARNING – RISK OF INJURY!
► Only use fresh drinking water! Do not consume any water that is not certi-
fied as drinkable . If you do, you are taking a risk with your health!
Before starting to use the appliance, ensure that . . .
– the appliance, power plug and power cord are in perfect condition and . . .
– all packaging materials have been removed from the appliance .
1) Remove the water tank 0 by holding its handle and slightly tipping the tank
out of the appliance .
2) Fill the water tank 0 . The water level must always reach at least the MIN
mark and never exceed the MAX mark on the water tank 0 .
3) Place the water tank 0 back in the appliance .
4) Place the capsule container 6 on the drip tray 9 (see fold-out page) .
Place the grille of the "Lungo" stand 8 on the drip tray 9 .
5) Push the capsule container 6 with the drip tray 9 forwards into the appliance .
6) If opened: Push down the lever 1 to the lowest possible position .
7) Fold the "Espresso" stand 7, located on the capsule container 6, upwards .
8) Place a cup under the coffee dispenser 5 on the "Lungo" stand 8 .
9) Insert the plug into a mains power socket .
10) Switch on the appliance by pressing the Espresso
button . Both buttons flash to indicate that the appliance is heating up . As
soon as both buttons light up permanently, the appliance has heated up .
11) Press the Lungo
appliance . Residues resulting during production are flushed out of the pipes .
12) Repeat this process 3 times . If necessary, empty the cup from time to time .
The appliance is now ready for use .
BKM 1250 A1
4 button . Water flows through the pipes and cleans the
2 or Lungo
4
25 ■
GB│IE │