Setting The Amount Of Coffee; Turning Off The Appliance - Bellarom BKM 1250 A1 Instrucciones De Uso

Setting the amount of coffee

You can adjust the amount of water that is pressed through the capsule . Select
less water if you prefer strong coffee; set a larger amount of water if you prefer
your coffee mild .
The appliance is preset to 40 ml for Espresso and 110 ml for Lungo .
Proceed as follows to set the amount of water:
■ To set the amount of water for Espresso:
Press and hold the Espresso
has flowed through . As soon you release the Espresso button
pump stops and the appliance stores the amount of water that has flowed
through for the next preparations .
The pump stops automatically once a water volume of 200 mil has flowed
through .
NOTE
► You can set water volumes between 25 and 200 ml .
■ To set the amount of water for Lungo:
Press and hold the Lungo
has flowed through . As soon you release the Lungo button
stops and the appliance saves the amount of water that has flowed through
for the next preparations .
The pump stops automatically once a water volume of 200 mil has flowed
through .
NOTE
► You can set water volumes between 25 ml and 200 ml .

Turning off the appliance

■ Press the Espresso
Fig . 1) . The buttons go dark and the appliance switches itself off .
BKM 1250 A1
2 button until the desired amount of water
4 button until the desired amount of water
2 and Lungo
Fig. 1
4, the pump
4 button at the same time (see
GB│IE
2, the
27 ■
│