Start-Up And Use; Starting The Dishwasher; Measuring Out The Detergent; Wash Options - Hotpoint Ariston LDFA++ 12H14 Instrucciones De Operación

Ocultar thumbs Ver también para LDFA++ 12H14:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49

Start-up and use

Switching the appliance on for the first
EN
time
ON/O..
DELAYED START
LOAD

Starting the dishwasher

see below
see Loading the racks
AUTO WASH CYCLES
If the crockery is only lightly soiled or if it has been
rinsed with water before being placed in the dishwasher,
reduce the amount of detergent used accordingly.
6
*
HAL.
see Table of wash cycles
see adjacent information
*:

Measuring out the detergent

A good wash result also depends on the correct amount of
detergent being used; exceeding the stated amount does
not result in a more effective wash and increases
environmental pollution.
Only use detergent which has been specifically
designed for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in foam
residue remaining in the machine after the cycle has
ended.
To achieve the best results from each washing and
drying cycle, powder detergent, rinse aid liquid and salt
should be used.
Compartment A:
Compartment B:
D
A
B
Table of wash cycles
C

Wash options*

The OPTIONS may only be set, modified or reset after the
wash cycle has been selected and before the Start/
Pause button has been pressed.
see Table of wash cycles

Publicidad

Tabla de contenido
loading

Tabla de contenido