Descargar Imprimir esta página

THOMSON 32VK45ES Manual Del Usuario página 78

Publicidad

CHECK SMALL SIGNAL BOARD
Start
Power ON
Check if the LED
shows an Error Code.
Analyse with the
Error Code table.
No
Supply Voltages
+8V,+8V_1,+8V_2
+5V_1 ok ?
Yes
Check :
8V_FE: 11 and 45 / IC001
- Tuner Power Pupply :
+30V : 9 / Tuner
+40V : 5/BR003
+5V : 6 / Tuner
Correct
No
V5D & 3VD3
ok ?
Yes
Check IR signal
6 / BR001 and
25 / IR001
- Check Clock SCL (2 / BX001)
and Data SDA (1 / BX001)
- Check Oscillator:
pins 11/12 IR001
Correct
- Check H_drive (2/BP005)
- Check V_drive (6/BV001)
- Check safety threshold
pin 5 / IV200 (Video Part)
No
pin 5 IV200
threshold >2V
Yes
Check:
- Horizontal Deflection
( POWER / SCAN BOARD)
- EHT too high.
- Yoke coil : Short-circuit, broken
or open.
- Cathode Ray-Tube
- Cathode Ray Current
Error
Code Table
Check Power Supply
No Correct
and Module
Protector ZR001..004
Check 3.3V
regulator and
IU390, LU303
( Upconverter part)
No Correct
Replace Small
Signal Board
Replace Small
Signal Board

Publicidad

loading