Tool Specifications; Machine Elements; For Your Safety; Intended Use - Bosch GSR 7,2-1 Instrucciones De Servicio

Tool Specifications

Cordless screwdriver
Order number
No-load speed
Torque adjustment range
Torque, max. in
position " ":
Soft screwdriving case
Hard screwdriving case
Drilling dia., steel, max.
Drilling dia., aluminium, max. [mm]
Drilling dia., wood, max.
Screw diameter max.
Chuck clamping range
Drill spindle thread
Weight with battery, approx.
Battery
Order number
Temperature control
Rated voltage
Capacity
Weight, approx.
Please observe the order number of your machine. The trade names of the individual machines may vary.

Machine Elements

1 Torque setting ring
2 Keyless chuck
3 On/Off switch/Speed control
4 Rotational direction switch
5 Screwdriver attachment (bit)
6 Battery
7 Battery unlocking button
8 Universal bit holder
9 Locking screw
Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The machine is intended for the screwing in and
loosening of screws as well as for drilling in wood,
metal, ceramic and plastic.
8 • 6 035 970 188 • 03.02
GSR 7,2-1
0 601 915 7.. 0 601 915 6.. 0 601 915 5.. 0 601 915 4..
[rpm] 0 – 600
[Nm] 1 – 7
[Nm] 8
[Nm] 20
[mm] 10
12
[mm] 15
[mm] 6
[mm] 1 – 10
3/8"
[kg] 1.3
NiCd
2 607 335 438 2 607 335 440 2 607 335 442 2 607 335 522
NTC
[V=] 7.2
[Ah] 1.2
[kg] 0.3
English - 1
GSR 9,6-1 GSR 12-1
0 – 600 0 – 700
1 – 7 1 – 8
9 10
24 26
10 12
12 15
15 18
6 6
1 – 10 1 – 10
3/8" 3/8"
1.4 1.5
NiCd NiCd
NTC NTC
9.6 12
1.2 1.2
0.4 0.5

For Your Safety

Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed.
Wear safety goggles.
For long hair, wear hair protection. Work only
with closely fitting clothes.
Before each use, check the machine and bat-
tery. If damage is detected, do not use the ma-
chine. Have repairs performed only by a qual-
ified technician. Never open the machine your-
self.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
when transporting and storing, always set
the rotational direction switch to the centre
position. Otherwise danger of injury is given
when unintentionally actuating the On /Off
switch.
GSR 14,4-1
0 – 700
1 – 8
11
27
12
15
20
6
1 – 10
3/8"
1.6
NiCd
NTC
14.4
1.5
0.6