Intended Use; Identification Plate; Safety Equipment - MTD ALPHA95-165H Manual De Instrucciones

Intended use

Intended use
This device is intended for use
- As a lawn tractor for mowing grass areas of a
house or gardens.
- With accessories explicitly approved for this lawn
tractor.
- In accordance with the descriptions and safety
notes provided in these operating instructions.
Any other use is classed as an unintended use.
Improper use invalidates the warranty and results in
a rejection of all responsibility by the manufacturer.
The user is liable for damage to third parties and
their property.
Unauthorised modifications to the device absolves
the manufacturer of liability for any damages that
result.
This device is not approved for operation on public
roads, nor for transporting people.

Identification plate

Position
The identification plate is located under / in front of
the driver's seat.
Note
The identification is considered as a docu-
ment. It must never be altered or obliterated.
2
3
4
5
6
7
8
/
Structure
1 Guaranteed sound level
2 Manufacturer
3 Model name
4 Model number
5 Serial number
6 Weight
7 Power
8 Motor rotation speed in rpm
9 CE label
10 Year of manufacture
1
9
Grass collector S
Contact with the cutting blade and objects
hurled out
ÂRisk of injury
¾ Only operate the device with the
grass collector attached or an optional
deflector.
Safety locking system
The safety locking system enables the starting of the
motor only when
- The driver has taken his/her seat on the device.
- The brake pedal is pushed down / the parking
brake is in the parking position.
- The accelerator pedal is at "N".
- The cutting mechanism is switched off; i.e.: PTO
switch to position "O/Aus/Off" (PTO = Power Take-
Off)
The safety locking system prevents mowing without
the grass collector attached or without the optional
deflector attached (automatic motor or cutting
mechanism deactivation).
In devices with a PTO switch (electromechanical
PTO), the safety locking system automatically
switches off the cutting mechanism once the
operator leaves the seat with the cutting mechanism
activated; irrespective of whether the parking brake
was activated beforehand.
In devices without an OCR function or with a
deactivated OCR function, the safety locking
system prevents reversing with the cutting
mechanism activated (automatic shutdown of motor
or cutting mechanism).
Prior to reversing on devices with PTO, switch off
Î
the cutting mechanism using the PTO switch.
Note on devices with a PTO switch
In the case of automatic shutdown through
10
the safety locking system (e.g. reversing or
leaving the seat with the cutting mechanism
activated), first switch the switch off, and
then back on again, to release the clutch
lock (PTO).

Safety equipment

CAUTION !
EN
13