Clock Functions; Clock Functions Table; Additional Functions - Zanussi ZOP38903 Manual De Instrucciones

WARNING!
Do not put the food into the oven
until the Fast Heat Up function is
completed.
1. Set an oven function. If necessary, change
the temperature.
2. Press .

Clock functions

Clock functions table

Clock function
Time of day
Minute Minder
Duration
End
You can use the functions Duration
and End
set the time for how long the
appliance should operate and when
the appliance should deactivate.
This lets you activate the appliance
with a delay in time. First set the
Duration and then the End
Setting the clock functions
For Duration and End
function and temperature. This is not necessary
for the Minute Minder
oven function".
1. Press again and again until the symbol
for the necessary clock function flashes.
2. Press or to set the necessary clock
function.

Additional functions

Using the Child Lock
The oven must be deactivated.
www.zanussi.com
To set, change or check the time of day.
To set countdown time. This function has no effect on the operation of
the appliance.
To set the cooking time of the oven.
To set the time of day when the oven should deactivate.
at the same time to
.
, set an oven
. Refer to "Setting an
The display shows FHU. The Fast Heat Up
function starts to operate.
When the Fast Heat Up function is completed,
an acoustic signal sounds. FHU goes out. The
set oven function continues to operate.
3. Put the food in the oven.
Application
The display shows the symbol for the clock
function you set. When the set time ends, the
symbol flashes and an acoustic signal sounds
for two minutes.
With the Duration
functions, the appliance deactivates
automatically.
3. Press a button to stop the signal.
4. Deactivate the appliance.
Cancelling the clock functions
1. Press again and again until the symbol
for the necessary clock function and
flash in the display.
2. Press and hold the button
function goes out.
and End
until the clock
9