KTM Akrapovic Instrucciones Para El Montaje página 3

1
2
5
3
4
Scope of supply: 1 x Slipon main silencer
Not included in the scope of supply (for SXC, SMC model without
HGS4 main silencer):
Mounting
– Dismount the left side cover.
– Dismount the standard main silencer.
– Loosen the SW10 fixing screw [1] on the exhaust manifold.
– Slide the Slipon main silencer with the ball flange on the exhaust
manifold and attach the tension springs [4].
2
– Front attachment: use the front silencer bracket [5] (58305165244).
– If installed, dismount the middle silencer bracket (58305165244) -
it will not be needed.
– Rear attachment: use the rear silencer bracket [2] (58405085044).
– Attach the Slipon main silencer with the M6x30 HH collar screw in
3 the front and with the carbon clamp [3] and M8x35 HH collar screw
in the rear.
– THE CARBON CLAMP IS NOT SYMMETRICAL [3]. BE SURE TO MOUNT IN
THE RIGHT DIRECTION.
– Tighten the SW10 fixing screw on the exhaust manifold [1].
– Mount the left side cover.
1 x Carbon fastening clamp
2 x Tension springs
1 x M8x35 HH collar screw
2 x DIN 9021 A8 washer,4 0021080003
1 x M8 self-locking nut 54310086200
1 x Silencer bracket 58405085044
2 x M6x20 HH collar screws
1 x Spring washer DIN 137 B6 0137060003
3