Main Unit Bottom/Side/Top - JVC TK-C205VP Manual De Instrucciones

Names and Operations of Parts

Main unit bottom/side/top

1 Safety cable installation screw
Install the safety cable using this screw.
CAUTION
Be sure to attach the safety cable. If not
attached, the camera body could drop
down.
Mounting holes
2
These holes are used to mount the
camera body to the ceiling. When using
a 4 inch square electrical box, the 2
holes are used to fix the box in place.
CAUTION
Use screw size suitable for the mounting
holes (∅4.4mm( 11
E-8
bottom
121mm
(4 3 / ")
4
/ ")).
64
side
3 Conduit hole
Hole for installation to conduit hole pipe
and wiring.
4 Conduit plug & hole (side)
When the unit cannot be installed to the
ceiling, the pipe is mounted to this hole
for wiring.
Tamper-resistant screws
5
Tamper-resistant screws for fixing the
dome cover to the base.
Use the provided wrench to install/
remove the Tamper-resistant screws.
top