When The Dome Camera Cannot Be Installed To The Ceiling - JVC TK-C205VP Manual De Instrucciones

Installation and connection

When the Dome camera cannot be installed to the Ceiling

When installation cannot be made to the ceiling, use the conduit hole on the main unit side
to install to the pipe.
2.
Set screw
Conduit
plug
3.
4.
E-16
1.
Follow steps 1 ~ 5 of Mounting the Base
to the Ceiling.
( page 10 & 11)
2.
Loosen the set screws (M3 × 6mm) with
a flat-head screwdriver and remove the
plug on the main unit side.
3.
Insert the removed plug into the conduit
hole on the bottom of the camera.
4.
Screw in the pipe into the conduit hole
on the main unit side.
CAUTION
When installing the pipe to the conduit hole
(side), do not screw in the thread portion
of the pipe more than 12mm(
Screwing in the pipe into the base more
than required may damage the base
interior.
5.
Steps hereafter are the same as when
installing the dome camera to the ceiling.
See pages 12 through 15.
15
/ ").
32