Fox LIVE VALVE Guia De Inicio Rapido página 9

STEP 3
Charge and Install the battery
The battery can be charged on or off the bike. To display the battery charge
level, press the Power button while the battery is connected to the main
controller. Battery level is indicated by 1-5 LED lights (when 5 LED lights
illuminate, the battery is fully charged).
1. Remove the cover over the charging port of the battery.
2. Insert the provided micro USB cable into the USB port of the battery.
Then connect the USB cable to any USB charging port.
3. The red charging LED will illuminate. The red charging LED will turn off
when battery charging is complete (approximately 2 hours).
4. Reinstall the cover over the charging port of the battery.
5. Remove the protective cover from the main controller mounted on the
bicycle frame and store it in a safe place.
NOTICE: Do not discard the controller's protective cover. This protective
cover must be transferred to the customer because is critical for
protecting the main controller when the battery is not connected (for
example, during charging off the bike). The main controller can sustain
damage through exposure to elements such as water and debris and
must be covered.
6. Remove the rubber cover from the battery and store it in a safe place.
NOTICE: Do not discard the battery's rubber protective cover. This
protective cover must be transferred to the customer because is critical
to protect the battery while it is in storage or being transported away
from the controller.
7. Install the battery onto the main controller. Align the pins on the main
controller with the port in the battery. Attach the two buckles into the
grooves of the battery and click them closed.
9