Safety instructions
For use in closed rooms only.
Do not allow the pump to rund dry. This may cause permanent
damage to bearings, pump wheel or electronic components. The
cooling liquid also serves to lubricate the bearings and to atten-
uate pump wheel vibrations.
Please use the pump to supply water or innovatek-Protect water
mixtures only. The use of other non-approved chemicals or addi-
tivies may cause permanent damage to seals or bearings.
Do not use the pump as a submerged pump.
Use the pump in a vertical position only.
Maintain a minimum distance of approx. 1 metre from CRT mo-
nitors to prevent interference in the display. Due to their con-
©
©
struction, CRT monitors always ract very sensitively to magnetic
fields – even very weak fields. The monitor is not damaged if the
1 m
distance is not maintained but the display is affected.
TIP:
Hard disks or other hardware is not affected and no safety dis-
tances or other measures must be observed.
The PCPS cannot be regulated by means of the voltage. If the
required 12 V drops by more than 25% the PCPS switches off.
If the voltage is exceeded by more than 25%, the PCPS may be
permanently damaged.
The product is approved according to the relevant national rules
and regulations and is in accordance with EU standards.
Do not dispose of this product as normal household waste. Take
it to your local refuse collection site.