EHEIM PCPS 1104 Manual De Instrucciones página 9

English
Many thanks
for purchasing a new EHEIM circulating pump with integrated equalizing tank. You
have chosen a high-quality product made by EHEIM.
The circulating pump is a high-quality product and works very reliably. Through the
use of a new type of housing the circulating pump and equalizing tank are combined
in one unit. Thanks to its compact construction it requires little space in a computer
housing and can be used for most computer cooling systems available on the
market.
Please read these instructions carefully before you install your EHEIM circulating
pump with integrated equalizing tank in your computer and before you start it up
or start any maintenance work.
Scope of delivery
1 circulating pump with integrated storage tank, 1 tank lid with mounted sealing
ring, 1 mounting plate, 1 instruction book.
Please check that all the parts are included.
Introduction
The EHEIM PCPS pump Model 1104 is a 12 V synchronous rotary pump, with the
power being supplied via a 4-pin plug (HDD/CD disk drive power supply connector).
The pump has a delivery head of 1.60 m wat.col. The power consumption is between
3.7 and 4 Watts, depending on the operating mode. After being switched on, the
PCPS starts with a low pressure and increases this gradually within about 3 seconds
to the operating pressure. This helps to extend service life and also protects the
mechanical parts significantly.
Circulating pump
mounting plate motor body with 4-pin HDD/CD drive power connector (12 V
DC) equalizing tank pump inlet IN with G 1/4˝ thread pump outlet OUT
with G 1/4˝ thread pump wheel with axle and 2 rubber bushes pump
housing lid with level marking and 2 fastening screws sealing ring tank
lid.