Labels And Symbols; Intended Use Of This Power Tool - Evolution EVOMAG 28 Instrucciones Originales

www.evolutionpowertools.com
(1.8)
LABELS & SYMBOLS
WARNING: Do not operate this machine if
warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools
for replacement labels.
Note: All or some of the following symbols
may appear in the manual or on the product.
SYMBOL DESCRIPTION
V
A
Hz
Min
-1
~ Alternating Current
n o No Load Speed
Double Insulated
Eye protection should be
worn at all times when
using this tool.
Hard Hat - Head protection
should be worn at all times
whilst using this tool, to protect
from overhead hazards.
Ear protection / Ear defenders
should be worn at all times
whilst using this tool.
This tool exceeds 85dB(A).
Volts
Amperes
Hertz
Speed
(9.13)
INTENDED USE OF
THESE POWER TOOLS
These power tools are intended to be used for
drilling holes with annular cutters and/or twist
drills in an industrial environment.
These machines are designed to be held onto
a ferrous surface using the electromagnetic
base.
These power tools should be used in a weather
protected environment, and be used with the
accessories provided by, or those recommended
by Evolution Power Tools.
These power tools can be used vertically,
horizontally and in an inverted position,
provided the magnetic adhesion and work
environment allow.
9
Wear Dust Protection
Electrical enclosure -
risk of electric shock.
Read and understand
the instruction manual -
before operating this tool.
Warning
Fuse
CE certification
CSA certification
WEEE - Waste Electrical &
Electronic Equipment. This
machine should be disposed of
as Electrical & Electronic Waste.
EN
ES
FR