Grandstream GXP2140 Enterprise Guia De Inicio Rapido página 6

GXP2140 EXTENSION MODULE:
The GXP2140 extension module is an ideal solution for the busy enterprise envi-
ronment looking to add the ability to receive and dispatch calls efficiently. Each ex-
tension module has 20 programmable buttons, Left and Right buttons, supporting
40 Multiple Purpose Keys to be configured. GXP2140 supports up to 4 extension
modules, adding 160 fully programmable phone extensions to the phone.
Note: The extension module is an additional accessory for the GXP2140 and is
not included in the GXP2140 box.
GXP2140 Extension Module Package Content:
1 X GXP2140 1 X GXP2140
Extension Board Extension Board Stand
1 X Extension Board
Connector Plate
7
1 X RJ11-RJ11 Cable
4 X Screws
Installing GXP2140 Extension Module:
1. On the back of GXP2140 and the extension board, there are slots for the
connector plate. Attach the connector plate between the slots for GXP2140 and
the extension board;
2. Apply the screws provided and securely tighten them in (see Figure in this
page);
3. Connect the extension board to GXP2140 via the EXT port using the RJ11-
RJ11 cable provided;
4. Install the phone stand on GXP2140 and extension board;
5. Power up the GXP2140. The GXP2140 extension board will show the booting
up screen with version information and connecting status;
6. After successfully booting up, the extension board will stay in idle. Press and
hold the Left button for 3 seconds to check the version information and status.
8