Gewiss JOINON Home Manual De Instalacion Y Uso página 22

Gewiss
2. Connect the power cables to the terminal block as shown in the following figure. The terminal blocks are
clamp type. Insert a flat-head screwdriver to free it and insert the cable in the indicated hole. Tighten it
using the screwdriver.
Single phase charging station. In three phase stations the connection terminals are R (phase R), S (phase S), T (phase T), N (neutral)
3. Screw the bottom cover onto the unit and tighten the packing glands in order to correctly secure the
cable.
22
T: Ground
L: Live
N: Neutral
and PE (ground).
ABA2023IQM01_ - 7.55.4.412.2 - Installation and Operation Manual
Installing and connecting the unit