To Use The Mower With The Grass Box; Tips To Use The Mower; Maintenance; Before You Do Maintenance - Gardena PowerMax Li-40/32 Manual De Instrucciones

20
1. Push and turn the adjust wheel (20) clockwise to lower
the cutting height.
2. Push and turn the adjust wheel (20) counterclockwise
to increase the cutting height.
To use the mower with the grass
box
WARNING!
• Risk of physical injury!
• Cut injury when the blade turns or the
product starts accidentally.
• Wait for the blade to stop, remove the
safety key and use gloves before you
open the protective flap (21).
• Do not put your hands in the discharge
opening.

Before you do maintenance

WARNING!
• Risk of physical injury!
• Cut injury when the blade turns or the
product starts accidentally.
• Wait for the blade to stop, remove the
safety key and use gloves before you do

maintenance.

24
1. Lift the protective flap (21).
2. Put the grass box into the product by the handle (11).
3. Make sure that the grass box is securely connected.
4. Start the product.
5. Stop the product.
6. Lift the protective flap (21).
7. Remove the grass box of the product by the handle
8. Empty the grass box.

Tips to use the mower

If grass residue is left in the discharge opening, pull the
mower backwards about 1 m so that the grass residue
can drop out downwards.
To produce a well-maintained lawn, we recommend to cut
the lawn regularly once a week if possible. The lawn
becomes thicker if you cut it frequently.
After relatively long cutting intervals (holiday lawn), first of
all cut in one direction with the highest cutting height and
then cut in the crosswise direction with the required
cutting height.
If possible, only cut the grass when it is dry, if the grass is
damp, the cutting pattern will be uneven.
11
21 22
Maintenance

To clean the product:

The level indicator (22) opens the lid while you do
mowing. When the level indicator (21) closes the
lid, the grass box is filled.
(11).
WARNING!
• Risk of physical injury!
• Risk of injury and risk of damage to the
product.
• Do not clean the product with water or
with a water jet (in particular high-pressure
water jet).
22 - 001 - 05.10.2016