Publicidad
Idiomas disponibles
Idiomas disponibles
Lubrication
See instructions in the manual of the motor manufacturer.
Maintenance and assembly instruction
The lubrication of the motor friction bearings has to be done according to the instructions of
the motor manufacturer. Quiet running of the fan must be checked regularly. Unsteady running
is caused by deposition in the impeller or by wear (unbalance) or by damage of the impeller
produced by foreign substances. Take suitable steps (cleaning, changing of defective parts,
lining-up) when the damage or cause for unsteady running is well-known. Unsteady running
leads to vibrations and faults in material.
Disassembly and re-assembly Dismantling and assembly should only be carried out
using the sectional drawing. Disassemble the tool until only, if you are skilled and have the
appropriate technical knowledge. Then only disassemble the tool as necessary to repair as
required. Keep contaminants such as dirt and grit away from the internal parts at all times.
Always determine and correct the cause of the problem prior to re-assembly. Further wear and
tool failure can result, if the original cause is not corrected.
Only original spare parts may be used. There is no warranty for damages and liability is
disclaimed, if non-original spare parts and accessories are used. The repairing of the machine
is allowed authorized expert companies only. The accessories applicable with our machine are
listed in our brochure.
Problem
a
Motor doesn' t start
b
Other problems
REPAIR INSTRUCTION
SPARE PARTS AND ACCESSORIES
No connection to power
Cause
Connect to power supply
supply
Contact authorized expert
Remedy
company
13
Publicidad
