Programmed Play; Cleaning And Maintenance; Technical Data - AEG MC 4428 CD Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
INFO (11/8)
If ID-3 Tag information has been stored this appears in
the display in the form of an LED ticker display. Press the
button once more in order to switch the function off
again.

Programmed Play

This can be used to program any desired sequence of
tracks.
1. Press the STOP key (15/1).
2. Press the MODE key (8/5). The word PROG fl ashes in
the display and „P01" (memory preset) appears. Use
the SKIP+/SKIP- buttons (5/4/6) to select the desired
track and then press the MODE button again. The
display changes to memory slot P02.
NOTE:
In the case of CDs in MP3 format, press the DIR+/
DIR- button (4 on the remote control), in order to
change the folder.
3. Select the next track with the SKIP+/SKIP- key and
press the MODE key again. Repeat the procedure
until all the desired tracks are selected.
NOTE:
As soon as the storage capacity of the tracks to be
programmed has been reached, the letters "FULL"
appear in the display.
4. Press the
II PLAY/PAUSE key (14/7). The playback
starts. The selected track numbers are shown in the
display in the correct order and the symbol
MP3 and PROG light up. Press this button to pause
briefl y the playback.
5. Press once the STOP key to stop the playback while
retaining the program.
6. To play the programme back again, press the
PLAY/PAUSE button.
7. To delete the program, press the STOP key twice. The
PROG control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The abbreviation
PROG goes off and the programmed order of tracks is
deleted from the memory.
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the MODE button
(8/5) up to three times and then you can use the func-
tions as described under MODE".
Playing back Music in MP3 Format
With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R.
05-MC 4428 CD AEG.indd 45
05-MC 4428 CD AEG.indd 45
This machine of is able to play MP3 CDs. Up to 200
tracks can be compressed and stored on these CDs. Your
machine detects an MP3 CD automatically (the total
number of tracks and MP3s appears in the display). If you
would like to play one of these CDs, proceed as described
under „Playing CDs/MP3". Tracks can be programmed as
described under „Playing Back Programmed Tracks".
Please note:
There are a number of diff erent recording and compres-
sion methods, as well as quality diff erences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to fi xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not a malfunction of the device.

Cleaning and Maintenance

• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a
slightly damp cloth without any additives.
Troubleshooting
Symptoms
CD can not be
played back.
or
CD jumps during
playback.
II

Technical Data

Model: ......................................................................... MC 4428 CD
Power supply: ....................................................220-240 V, 50 Hz
Power consumption:...............................................................13 W
Protection class: .............................................................................. ΙΙ
Net weight: ............................................................................2,80 kg
Radio section:
Frequency ranges: ................VHF / FM 87,5 ~ 108,0 MHz
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
English
Course
Solution
CD is not inserted
Ensure that the
or inserted incor-
disc is inserted
rectly.
with the label
facing upwards.
Check the disc
Check the disc
for fi ngerprints,
for fi ngerprints,
dirt or scratches.
dirt or scratches.
...................MW / AM 525 ~ 1611 kHz
29.12.2009 15:44:02 Uhr
29.12.2009 15:44:02 Uhr
45

Publicidad

Tabla de contenido
loading

Tabla de contenido